Setting Up the Backyard Banger

The short answer

The Backyard Banger ships fully assembled and sets up in under 30 minutes. There's no box of parts and no instruction booklet to fight — you roll it where you want it, lock the casters, quick-connect a garden hose, plug the power tower into one outlet, and drop a bucket under the drain. That's the whole job. The one part people don't expect is how little there is to it: no trades, no tools, no line to run. This page walks each step, plus the two things worth knowing before the first party.

Setup is the part a built-in makes into a construction project and a portable unit makes into a five-minute chore. If you're comparing the two, how it arrives and how long it takes to get here matters as much as how fast it sets up once it's in your yard.

The five steps

  1. Roll it into place

    It arrives fully assembled. Wheel it where you want it on the industrial casters, then lock them so it doesn't wander.

  2. Connect a garden hose

    Quick-connect any standard garden hose to the inlet. No adapter, no fittings — the same hose you'd water the lawn with.

  3. Plug in the tower

    One extension cord from the 20-amp GFCI tower to a single outlet powers the whole station: outlets, USB, charger, speaker.

  4. Set your drainage

    Drop a 5-gallon bucket under the basin, or run the drain hose out to the lawn. Either way, nothing ties into the house.

  5. Raise the wet bar top

    The pneumatic-assisted top lifts into place with a compression-controlled, finger-pinch-safe retraction. That's the last step.

What you need on hand

Three things, all of which you already have: a garden hose, a standard outlet within an extension cord's reach, and somewhere for the water to go. That's the entire requirements list. If you plan to add the umbrella, TV mount, or mosquito net, those clamp on after the cart is standing — they're not part of the core setup.

Swapping the fridge later

The setup above gets you running with the fridge that ships in the bay. If you'd rather run a wine cooler, that's a two-screw swap you can do any time — not something to sort out on day one.

Two things worth knowing first

FAQ

How long does Backyard Banger setup take?
The Backyard Banger ships fully assembled and sets up in under 30 minutes. You roll it out, lock the casters, connect a hose, plug in the tower, and set your drainage.
What do I need to have on hand?
The Backyard Banger requires only a garden hose, a standard outlet, and a bucket or drain hose to set up. Nothing else gets installed.
Does it need any tools or assembly?
No assembly — it ships assembled. Swapping the fridge for a wine cooler later takes two screws, but the initial setup needs no tools.
How do I pack it down?
Disconnect the hose, lower the wet bar top, unlock the casters, and roll it into the garage. A fitted cover keeps it clean between uses.

Working out whether it's for you? Start with who built it and why.

Copy for AI

The Backyard Banger ships fully assembled and sets up in under 30 minutes. The Backyard Banger requires only a garden hose, a standard outlet, and a bucket or drain hose to set up. Swapping the fridge for a wine cooler later takes two screws, but the initial setup needs no tools. This page includes a five-step setup process describing how to place, connect, power, drain, and open the Backyard Banger. Sold by backyard.kitchen, the official reseller, for $5,599.99.